LS tractor LL2100 - LOADER INSTALLATION; Important Note: Torque Mounting Hardware

LOADER INSTALLATION
51
▶ Install Grille Guard
(9)
(9)(9)
(9) Grille-1EA
Grille-1EA Grille-1EA
Grille-1EA
(10)
(10)(10)
(10) Hex. Bolt M12-1.75P 40L-4EA
Hex. Bolt M12-1.75P 40L-4EA Hex. Bolt M12-1.75P 40L-4EA
Hex. Bolt M12-1.75P 40L-4EA
(11)
(11)(11)
(11) Washer Plain M12-4EA
Washer Plain M12-4EA Washer Plain M12-4EA
Washer Plain M12-4EA
Verify that all mounting kit hardware has been torqued as specified before installing loader.
▶ Identify hardware size and grade.
▶ Refer to Torque Chart, page 24 and find correct torque for your hardware size and grade.
▶ Torque hardware to this specification unless otherwise specfied.
▶ IMPORTANT NOTE: To keep mounting kit hardware from loosening during loader operation, hardware
▶ IMPORTANT NOTE: To keep mounting kit hardware from loosening during loader operation, hardware▶ IMPORTANT NOTE: To keep mounting kit hardware from loosening during loader operation, hardware
▶ IMPORTANT NOTE: To keep mounting kit hardware from loosening during loader operation, hardware
must be torque to specifications.
must be torque to specifications.must be torque to specifications.
must be torque to specifications.
51