To Next PageTo Next Page
Need help?Do you have a question about the LS tractor LL3100 and is the answer not in the manual?
General| Number of Cylinders | 3 |
|---|---|
| Brakes | Wet Disc |
| PTO Type | Independent |
| PTO Speed | 540 RPM |
| 3-Point Hitch | Category I |
| Engine HP | 31 HP |
| Aspiration | Naturally aspirated |
| Number of Gears | 8 Forward / 8 Reverse |
| Steering | Power steering |
Details the terms and conditions under which the LS Mtron loader is covered by warranty.
Outlines the purchaser's responsibilities and conditions for maintaining warranty validity.
States the manufacturer's right to alter product designs without prior notice.
Emphasizes reading and understanding all manuals and decals before operation for safety.
Highlights the necessity of ROPS and seat belts for operator safety and protection.
Provides safety guidelines for the operator's personal conduct while working with the loader.
Details safety measures to protect other individuals in the vicinity of the loader's operation.
Indicates the placement of important warning and information decals on the loader.
Provides instructions for maintaining the cleanliness and integrity of safety decals.
Provides crucial safety reminders and directs users to other sections for comprehensive information.
Explains the process and importance of filling out warranty forms for validation.
Details the significance of the serial number and its location for part ordering and service.
Explains the importance and methods of adding rear counterweight for loader stability.
Stresses the requirement for an approved ROPS System for operator safety.
Highlights the increased demands on the tractor's hydraulic system and maintenance needs.
Covers tire selection and inflation for optimal loader performance and stability.
Specifies the importance of correct front wheel tread settings for stability.
Advises against using front counterweight when a loader is attached.
Offers essential precautionary notes for safe and effective loader operation.
Details the initial steps for operating the loader for the first time, including system checks.
Provides guidance on operating the loader in cold weather conditions.
Emphasizes crucial steps like lowering the loader and relieving hydraulic pressure before maintenance.
Provides a note on checking hydraulic system oil levels under specific conditions.
Explains how parts are illustrated, referenced, and described in the manual.
Defines how 'right hand' and 'left hand' are determined for directional references.
Provides instructions on how to correctly place an order for replacement parts.
Explains the meaning of symbols used for part group names, section names, and components.
Details symbols indicating part interchangeability due to design changes.
Provides a caution to refer to tractor and loader decals for safety information.
