LS tractor LL2100 - LOADER INSTALLATION; Caution: Lift and Support Safely

LOADER INSTALLATION
▶ IMPORTANT: Do not tighten any hardware until all components are attached onto the tractor.
▶ IMPORTANT: Do not tighten any hardware until all components are attached onto the tractor.▶ IMPORTANT: Do not tighten any hardware until all components are attached onto the tractor.
▶ IMPORTANT: Do not tighten any hardware until all components are attached onto the tractor.
CAUTION: Lift and support all loader components safely.
CAUTION: Lift and support all loader components safely.CAUTION: Lift and support all loader components safely.
CAUTION: Lift and support all loader components safely.
◈ Position the loader on a hard level surface. The more level the surface the easier the loader is to install.
▶ Using a hoist, install Mounting Frame LH/RH.
▶ Install Under Cross Bar And Rear Frame LH/RH.
(1)
(1)(1)
(1) Mounting Frame LH-1EA
Mounting Frame LH-1EA Mounting Frame LH-1EA
Mounting Frame LH-1EA (5)
(5)(5)
(5) Under Cross Bar-1EA
Under Cross Bar-1EA Under Cross Bar-1EA
Under Cross Bar-1EA
(2)
(2)(2)
(2) Mounting Frame RH-1EA
Mounting Frame RH-1EA Mounting Frame RH-1EA
Mounting Frame RH-1EA (6)
(6)(6)
(6) Hex. Bolt M14-2.0P 40L-4EA
Hex. Bolt M14-2.0P 40L-4EA Hex. Bolt M14-2.0P 40L-4EA
Hex. Bolt M14-2.0P 40L-4EA
(3)
(3)(3)
(3) Hex. Bolt M12-1.75P 40L-16EA
Hex. Bolt M12-1.75P 40L-16EA Hex. Bolt M12-1.75P 40L-16EA
Hex. Bolt M12-1.75P 40L-16EA (7)
(7)(7)
(7) Hex Nut M14x2.0P-4EA
Hex Nut M14x2.0P-4EAHex Nut M14x2.0P-4EA
Hex Nut M14x2.0P-4EA
(4)
(4)(4)
(4) Washer Spring M12-16EA
Washer Spring M12-16EA Washer Spring M12-16EA
Washer Spring M12-16EA (8)
(8)(8)
(8) Washer Spring M14-4EA
Washer Spring M14-4EAWasher Spring M14-4EA
Washer Spring M14-4EA
50