Product maintenance
CAUTION :
POINT 1
POINT 2
If Broom do not used for a long time. To inject sufficient grease immediately before using
Product maintenance
In order to maintain the performance of the product and prevent damage or abrasion, it is necessary to
inject sufficient grease into the designated area periodically.
For safe work, check the tightening of bolts or nuts before work.
If abnormal shaking or noise occurs through preliminary operation before work,
stop the operation and start work after the cause is eliminated.
Product damage or personal injury may result.
Every 6 months
Before startin
work, remove the
rease in
ection cover and in
ect enou
h
rea
- 14 -
To Next Page
Loading...
