EasyManuals Logo

LS tractor XG3037H User Manual

LS tractor XG3037H
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
5 -9
z
Check the following check points before using to avoid a failure.
5-6. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
operation
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
(1) Engine oil
z
Oil specification and capacity :
See section 5-3, “Lubricants and Capacity” or
the last page in this manual.
z
Using engine oil
Select engine oil depending on the temperature
as shown in the right table.
z
Checking oil level
- Check oil level before starting engine or at 5
minutes later after stopping engine.
- Check If the oil is between MAX and MIN mark
of the oil gauge. If necessary, add new oil.
- It must only be performed while the engine is
stopped.
Temperature Lubricant No.
Below -10
(Below 14)
SAE 5W-30
-10 ~ 40
(14 ~ 104)
SAE 10W-30
Above 40
(Above 104)
SAE 15W-40

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LS tractor XG3037H and is the answer not in the manual?

LS tractor XG3037H Specifications

General IconGeneral
BrandLS tractor
ModelXG3037H
CategoryTractor
LanguageEnglish

Related product manuals