4 -6
HST type
1. Pull position control lever back to lift the
implement up after starting engine.
2. Set the engine speed more than 1500
rev/min.
3. Place the range gear shift lever in suitable
position.
4. Press the brake pedals and release the
parking brake lever.
5. Press the HST forward/reverse pedal down
slowly to move the tractor.
6. If necessary, move the cruise control lever
downward to fix the constant driving speed.
▶ If pressing brake pedals or HST forward pedal down deeper, the cruise control
drive shall be stopped.
▶ For HST model, there is a switch on the driver’s seat to control engine cut-off for
driver’s safety. If the operator leaves the driver’s seat without safety measures, the
engine shall be stopped automatically. For further information, see section 2-1-(2).
▶ When driving or working with a tractor, operate it more than 1500 rev/min.
▶ Press the HST forward/reverse pedal slowly. If pressing these pedals hastily, the
tractor can be started suddenly.
Caution
Position control lever
Range gear shift lever
HST reverse pedals
Brake pedals
Throttle lever
Parking brake lever
Cruise control lever
HST forward pedals
To Next Page
Loading...
Need help?
General
