LS Susol Series - Relay Setting Display

4. 온도 센서
5. Relay Setting Display
Display Button Contents
If pressing MENU’ button 3 times from the measurement Display, move to
Communication Address Setting screen. Communication Address can
be set from 1 to 247.
Press Enter button to save the setting, otherwise press ESC/RESET button to move
back to Measurement Display. If successfully saved, “SAVE” is displayed on screen
and move to Measurement Display and if pressing ESC/RESET button, move to
Measurement Display without saving.
If pressing ‘MENU’ button 3 times from measurement Display screen, move to
Communication Speed Setting screen.
Communication speed can be set through Baud rate 38400 / 19200 / 9600.
If pressing ‘Up / Down’ cursor, the value of Baud rate rolling over will be displayed
Press Enter button to save the setting, otherwise press ESC/RESET button to move
back to Measurement Display. If successfully saved, “SAVE” is presented on screen
and move to Measurement Display and if pressing ESC/RESET button, move to
Measurement Display without saving.
If pressing ‘MENU’ button 4 times from Measurement Display,
move to Present Time Display.
The present time is displayed with ‘hour’ and ‘minute’ by 24H type and Dot between
hour and minute turns on and off every second.
Unless present time is set, present time will be set ‘1 hour 1minute’ as initial time is
set as ‘1hour 1minite 1 second January 1st, 2000’.
If pressing ‘MENU’ button 5 times from Measuring Display, move to Option Index.
An initial screen of Option display is ‘OCGR blocking time setting’.
-Setting range : 0 ~ 60s
-Default value : 0s
Press the Enter button and change to the up-down button.
If pressing ‘UP’ button once from Option Display, move to OCGR operation mode
setting screen.
-Mode : Trip / Alram
-Default : Trip
Press the Enter button and change to the up-down button.
If pressing ‘UP’ button two times from Option Display, move to Thermal operation
mode setting screen.
-Default : 49
Press the Enter button and change to the up-down button.
M
x 2
M
x 3
M
x 4
M
x 5
Communication
address
Speed
Present
time
Option
Measurement
display
Relay setting
display
Communication
Address setting
Communication
Speed set
Present time
display
Event
index
Firmware
version
K. The operation of Trip unit
35
Option
display
M
X 5
X 1
M
X 5
X 2
Blocking
OCGR OP.
Thermal