- This breaker and cradle are designed to move easily by overhead lifting devices such as hoisters. You
can use lifting hooks which is optional to move them without difficulty. All the carrying devices should be
suited to the product’s permissible weight which is presented in Table.1. In case of using forklift, refer to
figure.1.
-When lifting products with forklift, be careful with the bottom plane not to exceed the rear side of
products. (Refer to fig.1)
F. Handling and storage
1. Handling
Fig 1. Lifting by forklift
1.To lift the breaker (Fixed type), use the lifting hooks on the sides of the breaker, and lift with rope or
something similar.
2. When placing the breaker on the ground, be careful not to drop or to impact the breaker.
3. When the draw-out breaker is lifted with the cradle, lift it in the connected position.
4. Never slide the breaker when handling.
■ Precaution of handling
Fig. 2. Handling method of fixed type
Fig. 3. Handling method of draw-out type
16
To Next Page
Loading...