195
TECHNICAL STANDARDS APPLIED
The standards applied in order to comply with the essential requirements of the Directives 73/23/CEE "Electrical material intended
to be used with certain limits of voltage" and 89/336/CEE "Electromagnetic Compatibility" are the following ones:
• EN 50178 (1997) “Electronic equipment for use in power installations”.
• EN 61800-3/A11 (2000) “Adjustable speed electrical power drive systems. Part 3: EMC product standard
including specific methods”
• EN 55011/A2 (2002) “Industrial, scientific and medical (ISM) radio-frequency equipment. Radio disturbances
characteristics. Limits and methods of measurement”
• EN 61000-4-2/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 2: Electrostatic discharge immunity test.
• EN 61000-4-3/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 3: Radiated, radiofrequency, electromagnetic field immunity test.
• EN 61000-4-4/A2 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 4: Electrical fast transients / burst immunity test.
• EN 61000-4-5/A1 (2000) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 5: Surge immunity test.
• EN 61000-4-6/A1 (2001) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 6: Immunity to conducted disturbances, induced by radio-frequency fields.
• CEI/TR 61000-2-1 (1990) “Electromagnetic compatibility (EMC). Part 2: Environment. Environment description for
low-frequency conducted disturbances and signalling in public low voltages supply
systems”
• EN 61000-2-2 (2002)
(<22Kw)
“Electromagnetic compatibility (EMC). Part 2: Environment. Compatibility level for low-
frequency conducted disturbances and signalling in public low voltages supply
systems”
• EN 61000-2-4 (1997)
(>22Kw)
“Electromagnetic compatibility (EMC). Part 2: Environment. Compatibility level in
industrial plants for low-frequency conducted disturbances”
• EN 60146-1-1/A1 (1997)
(>22Kw)
“Semiconductor converters. General requirements and line commutated converters. Part
1-1: Specifications of basic requirements”
To Next Page
Loading...
Need help?
General
