Need help?Do you have a question about the LSI MegaRAID SAS 9261-8i and is the answer not in the manual?
General| Controller Model | LSI MegaRAID SAS 9261-8i |
|---|---|
| Host Interface | PCIe 2.0 x8 |
| Number of Ports | 8 |
| Max Devices Supported | 128 |
| Maximum Drives | 128 |
| Cache Memory | 512MB DDRII |
| Battery Backup Unit (BBU) | Optional |
| Form Factor | Low Profile |
| Storage Humidity | 5% to 95% non-condensing |
| Data Transfer Rate | 6 Gbps per port |
| Max Throughput | 6 Gbps per port |
| Connector Type | SFF-8087 |
| Operating Temperature | 0°C to 55°C |
| Interface | SAS 2.0 |
| RAID Levels | 0, 1, 5, 10, 50 |
| Operating Humidity | 5% to 90% non-condensing |
Details the limitations regarding drive support and array configurations for SAS RAID controllers.
Provides contact information and resources for technical assistance with the RAID controllers.
Lists the necessary items and system prerequisites for installing a MegaRAID controller.
Provides a streamlined installation process for experienced users.
Offers comprehensive, step-by-step instructions for installing the RAID controller.
Covers post-installation steps like configuration and driver installation.
Describes the types of cables and connectors used for SAS and SATA II devices.
Provides detailed technical specifications, including certifications and compliance.
Lists specific specifications like processor, part numbers, card size, and interface.
To Next Page
