Need help?Do you have a question about the LSI 3ware 9750-8i and is the answer not in the manual?
General| Brand | LSI |
|---|---|
| Model | 3ware 9750-8i |
| Category | Controller |
| Language | English |
Details the hardware, OS, and software prerequisites for the 3ware 9750 RAID controller.
Explains fundamental RAID concepts, levels, and their implications for performance and fault tolerance.
Introduces the primary software tools (3BM, 3DM2, CLI) used for managing 3ware RAID controllers.
Outlines the fundamental steps involved in creating a RAID unit using the 3BM utility.
Details how to designate a drive as a hot spare for automatic rebuilds in case of drive failure.
Details how to configure user preferences, email notifications, and remote access in 3DM2.
Explains controller-level policies that affect all units and drives.
Details how to configure the controller's automatic rebuild behavior for degraded units.
Explains how to use auto-carving to create multiple volumes from large arrays.
Describes how to configure drive spin-up behavior and delays.
Provides procedures for creating new RAID units using 3DM2 and 3BM.
Explains how to designate an available drive as a hot spare for automatic rebuilds.
Details various unit policies like Write Cache, Read Cache, and Auto-Verify.
Describes how to manage the unit's write cache setting for performance.
Covers processes like RAID Level Migration and Online Capacity Expansion.
Provides instructions for safely removing a unit or its drives.
Explains how to move units between controllers using array roaming.
Details the procedure for adding a new drive to the system.
Provides methods for updating controller firmware and drivers.
Provides essential checks for common hardware and connection issues.
A guide to common issues and their resolutions.
To Next Page
