EasyManua.ls Logo

LSI MegaRAID SAS 9271-8i - User Manual

LSI MegaRAID SAS 9271-8i
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MegaRAID SAS 9271-4i and SAS 9271-8i
RAID Controllers
Quick Installation Guide
June 2012
53822-00, Rev. A
53822-00A

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the LSI MegaRAID SAS 9271-8i and is the answer not in the manual?

LSI MegaRAID SAS 9271-8i Specifications

General IconGeneral
BrandLSI
ModelMegaRAID SAS 9271-8i
CategoryController
LanguageEnglish

Summary

Product Overview

CacheVault Flash Module and CacheVault Power Module

Describes the CacheVault Module Kit LSICVM01, including CVFM02 and CVPM02 modules.

Installing the RAID Controller

Install the RAID controller

Instructions on inserting the controller into a PCI Express slot and securing it.

Run WebBIOS Configuration Utility

Guides on using the WebBIOS Configuration Utility for groups and virtual drives.

Install operating system driver

Instructions for installing the necessary software drivers for the controller.

Supported RAID Levels

Attaching CVFM02 Module and Connecting to CVPM02

Connecting the LSIiBBU09 Unit

Reinstall RAID Controller on Motherboard

Instructions for reinstalling the RAID controller onto the motherboard after BBU unit attachment.

Connect Remote LSIiBBU09 Unit

Procedures for connecting a remote LSIiBBU09 unit to the RAID controller by cable.

Reinstall RAID Controller in Computer

Steps for reinstalling the RAID controller in the computer after connecting the remote BBU unit.

Related product manuals