www.lsi.com/channel/products 65
6
Configuring Your Controller
This chapter describes how to view details about the controller, check its
status, and change configuration settings that affect the controller and all of
the drives connected to it. This chapter is organized into the following
sections:
• Viewing Information About a Controller
• About Controller Policies
• Viewing Controller Policies
• Setting the Auto-Rebuild Policy
• Using Auto-Carving for Multi LUN Support
• Setting the Size of Volumes Created with Auto-Carving
• Enabling and Setting Up Staggered Spin-up
• Viewing Information About a Phy
• Changing the Phy Link Speed
Viewing Information About a Controller
You can check the controller model, serial number, firmware and driver
versions, and the status of the 3ware RAID controller in your computer.
If you have more than one controller in your system, you can easily view
information about each one using 3DM2. If you are working at the BIOS level
in 3BM, you access each controller separately.
Note: Background task rate is also set for all units on a controller. For information
about setting the task rate, see “Setting Background Task Rate” on page 162.
Mac User Note: The 3ware BIOS Manager (3BM) is not supported for Mac OS.
Mac users should disregard any 3BM instructions throughout this chapter.
To Next Page
Loading...
Need help?
General
