Need help?Do you have a question about the LSI MegaRAID SAS 9271-4i and is the answer not in the manual?
General| Host Interface | PCIe 3.0 x8 |
|---|---|
| Number of Ports | 4 |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Form Factor | Low Profile |
| Data Transfer Rate | 6Gb/s per port |
| SAS Speed | 6Gb/s |
| Operating Temperature | 0°C to 55°C |
| Controller Type | RAID |
| Memory | DDR3 |
| Cache | 512MB DDRIII |
| Ports | 4 |
| SAS Ports | 4 |
| Storage Humidity | 5% to 95% (non-condensing) |
| Cache Memory | 512MB DDRIII |
| Operating Humidity | 5% to 95% non-condensing |
Describes the CacheVault Module Kit, CVFM02 and CVPM02 components for data protection.
Explains the LSIIBBU09 unit and its function for data integrity during power loss.
Details the jumpers and connectors on the RAID controller for installation reference.
Instructions for inserting and securing the RAID controller into a PCI Express slot.
Shows the top and bottom views of the CVFM02 module for installation reference.
Instructions for physically attaching the CVFM02 module to the RAID controller.
Steps for installing the clip onto the remote mount board for the CVPM02 module.
Instructions for attaching the CVPM02 module to the clip on the remote mount board.
Steps to connect the CVFM02 module to the remote CVPM02 module using a cable.
Instructions for reinserting the RAID controller back into the PCI Express slot.
Steps for installing the remote mount board into the system chassis.
Shows the top and bottom views of the LSIiBBU09 unit for reference.
Instructions for physically attaching the LSIiBBU09 unit directly to the RAID controller.
Instructions for reinserting the RAID controller back into the motherboard slot.
Explains how to connect the LSIiBBU09 unit remotely via cable to the RAID controller.
To Next Page
