Channel Calibration
- 26 -
MXD70 Electrodeless Conductivity
Setup and Operating Guide
Channel Calibration
Next Calibration Date
Sets the exact date of the next calibration alarm.
The Calibration Interval will update to show the
number of days to the next calibration date.
/ – Increase / Decrease Digit or Text

– Select Next Item
EXIT
– Cancel
– Save Entry
Defer Calibration Date
Turns off the alarm and increases the calibration
interval by an extra 7 days.
Only appears once the calibration interval has
expired.
YES
– Increase Interval
NO
– Cancel
To Next Page
Loading...
Need help?
General
