LTH Electronics MXD70 Series - Page 337

Channel Setup
MXD70 Dissolved Oxygen
Setup and Operating Guide
- 21 -
Channel Setup
Pressure Limit A
Defines the Pressure Damping Limit A “From” value.
Menu only available when Pressure Damping is set to
“Enable”.
/ – Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value
Pressure Limit B
Defines the Pressure Damping Limit B “To” value.
Menu only available when Pressure Damping is set to
“Enable”.
/ – Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value
Input Pressure
The fixed pressure used for manual pressure
compensation.
Only available when pressure compensation mode is
set to “manual”.
/ – Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value