Coils
Modbus RS485 Interface
Operating Guide
- 83 -
Coils
Calibration Resets Continued
pH / Redox Reset Sensor Calibration Channel 1 140 0 = N/A
Channel 2 205 1 = Activate
Channel 3 270
Reset Temperature Calibration Channel 1 141
Channel 2 206
Channel 3 271
Reset Entire Calibration Channel 1 142
Channel 2 207
Channel 3 272
Reset pH Custom Buffer Channel 1 143
Channel 2 208
Channel 3 273
Suspended
Solids /
Turbidity
Reset Entire Calibration Channel 1 150
Channel 2 215
Channel 3 280
Unit Calibration Reset
Unit Reset Entire Unit Calibration 295 0 = N/A
1 = Activate
Current Output Resets
Current
Output
Reset 4-20mA Output Output A 310 0 = N/A
Output B 311 1 = Activate
Output C 312
Output D 313
Output E 314
Output F 315
Reset All 4-20mA Outputs 316
Save Setup
Channel Save Setup To Slot A Channel 1 325 0 = N/A
Channel 2 330 1 = Activate
Channel 3 335
Save Setup To Slot B Channel 1 326
Channel 2 331
Channel 3 336
Unit Save Entire Unit To Slot A 340
Save Entire Unit To Slot B 341
Restore Setup
Channel Restore Setup From Slot A Channel 1 350 0 = N/A
Channel 2 335 1 = Activate
Channel 3 360
Restore Setup From Slot B Channel 1 351
Channel 2 336
Channel 3 361
Unit Restore Entire Unit From Slot A 365
Restore Entire Unit From Slot B 366
To Next Page
Loading...
Need help?
General
