LTSscale.com Page 18 of 28 REV F ā 2018.04.09
PRINT ITEM # 1
Available items to be printed are:
ID (Identification Number)
Press DEL key to select item.
Press ENTER key to accept setting.
# SPACES OVER
Sets the starting point on the left-hand margin for the selected print field.
Key in the value for the starting point for Print Item 1.
Press ENTER key to accept setting.
# CR LF
Sets the vertical spacing between lines of data.
0 = next line of data will be printed on the same line
1 = data will be printed on the next line
2 = double spacing, one blank line between print field
More line feeds results in a bigger vertical space between data lines.
Use the numeric keypad to enter the value.
Press ENTER key to accept setting.
PRINT ITEM #1 to PRINT ITEM #9 must be configured to print any of the ten print items in
any order desired. Repeat Print Item, # spaces and # CR LF for all nine Print Items before
next prompt is displayed.
# BTM LINE FEEDS
Set to print blank lines (feed paper down) after printing selected data fields.
Use the numeric keypad to enter the required value.
Press ENTER key to accept setting.
Code 9085 - Setting Time & Date (Optional)
Note: this indicator utilizes the 24-hour clock (military time).
Press keys 9085. Press ENTER key.
YEAR
1 or 2 digit year entry (0 to 99).
Use the numeric keypad to enter the Year.
Press ENTER to accept setting.
MONTH
Use the numeric keypad to enter the Month.
Press ENTER to accept setting.
DAY
Use the numeric keypad to enter the Day.
Press ENTER to accept setting.
HOURS
Use the numeric keypad to enter the Hour.
Press ENTER to accept setting.
MINUTES
Use the numeric keypad to enter the Minutes.
Press ENTER to accept setting.
# BTM LINE FEEDS
NUMBER = 1
SET TIME & DATE
MONTH = 1
SET TIME & DATE
MINUTES = 1
To Next Page
Loading...