LTSscale.com Page 20 of 28 REV F – 2018.04.09
Display on PC will show:
[ LTS SCALE ...CHANGE NAME ? Y/N]
To change: Send capitol “Y” from the PC to DR2100A.
Indicator sends:
[ENTER ALL 16 CHARACTERS ]
[---------------- ]
Send all 16 characters. Fill to end with spaces if needed.
[YOUR NAME HERE ...CHANGE NAME ? Y/N]
If name is correct, then press any key to end, if not return to step I).
NOTE: To exit this mode from the keyboard: Press and hold DEL and R keys,