Two-Wire Indoor Station Configuration Guide
8
Figure 2-9 Device Information
Restore the door
station via indoor
station.
Tap to restore the parameters of the door station.
Modify the IP
address of the linked
door station.
Tap to modify the IP address of door station.
3. Select the device to link. Edit the network parameters.
2.3.3 Set Indoor Station No.
Indoor station No. and the indoor extension No. are numbers, which can be dialed by other
devices to call the indoor station and the indoor extension in an intercom system. The indoor
station No., is composed of the floor No. and the room No.
The indoor extension No. Should be a numeric from 1 to 5.
Up to 5 indoor extensions can be set for 1 indoor station.
Steps
1. Tap Settings → → Configuration → to enter the indoor station No. settings page.
Note
Default admin password is the activation password.
To Next Page
Loading...
