Two-Wire Indoor Station Configuration Guide
9
Figure 2-10 Set Indoor Station No.
2. Select Indoor Station to set the indoor station No. (Room No.) and the floor No.
3. Select Indoor Extension to set the indoor extension No. and the room name.
2.4 Door Settings
Steps
1. Tap Settings → → Door Settings to enter the settings page.
2. Enable Door No. 1 or Door No. 2 according to your needs.
3. Set the Open Duration for the door.
Note
Open duration ranges from 1 to 5 seconds.
2.5 Sound Settings
You can set the ringtone, ring duration, call forwarding time, volume of microphone and
loudspeaker, enable/disable touch sound and auto-answer function on call settings page.
Steps
1. Tap Settings → to enter the call settings page.
To Next Page
Loading...
