Two-Wire Indoor Station Configuration Guide
2
Chapter 2 Local Operation
2.1 Activate Indoor Station
You can only configure and operate the indoor station after creating a password for the device
activation.
Steps
1. Power on the device. It will enter the activation page automatically.
Figure 2-1 Activation Page
2. Create a password and confirm it.
3. Tap OK to activate the indoor station.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
To Next Page
Loading...
