LTS LTH-D301GY-WIFI-2 - Indoor Station Configuration; Programming Indoor Station Relationships; Configuring Main Door Station Link for Indoor Stations; Configuring Indoor Station Room Number

Two-Wire Indoor Station Configuration Guide
3
2.2 Quick Operation
After device activation, the wizard page will pop up.
Steps
1. Choose Language and tap Next.
Figure 2-2 Language Settings
2. Set network parameters and tap Next
– Edit Local IP, Subnet Mask and Gateway parameters.
– Enable DHCP, the device will get network parameters automatically.
Figure 2-3 Network Parameters
3. Configure the indoor station.
1) Choose Indoor Station Type.
2) Edit Floor and Room No.
3) Tap Next.