Two-Wire Indoor Station Configuration Guide
4
Figure 2-4 Indoor Station Settings
4. Linked related devices and tap Next. If the device and the indoor station are in the same LAN,
the device will be displayed in the list. Tap the device or enter the serial No. to link.
Figure 2-5 Related Device
1) Tap the door station in the list to link.
Note
If the door station is inactive, the system will pop up the dialog to activate the door station.
2) Tap to pop up the Network Settings page.
3) Edit the network parameters of the door station manually or enable DHCP to get the network
parameters automatically.
4) Optional: Enable Synchronize Language to synchronize the language of door station with
indoor station.
To Next Page
Loading...
