LTS LTN8708-P4 - Page 144

User Manual of 87XX-P Series NVR
144
Figure 11. 12 DDNS Settings Interface
4. Check the DDNS checkbox to enable this feature.
5. Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and
HiDDNS.
• LTS:
Enter the Server Address and Device Domain Name for LTS.
1) Enter the Server Address of the LTS server, which is ns1.dvrlist.com by default.
2) Enter the Device Domain Name. You can use the alias you registered in the LTS server or define a
new device domain name. If a new alias of the device domain name is defined in the NVR, it will
replace the old one registered on the server. You can register the alias of the device domain name
in the LTS server first and then enter the alias to the Device Domain Name in the NVR; you can
also enter the domain name directly on the NVR to create a new one.
Figure 11. 13 LTS Settings Interface
• IPServer: Enter Server Address for IPServer.
Figure 11. 14 IPServer Settings Interface
• DynDNS:
1) Enter Server Address for DynDNS (i.e. members.dyndns.org).
2) In the NVR Domain Name text field, enter the domain obtained from the DynDNS website.
3) Enter the User Name and Password registered in the DynDNS website.