User Manual of 87XX-P Series NVR
204
15.5.3 Editing a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
2. Select the user to be edited from the list, as shown in Figure 15. 15.
3. Click the icon to enter the Edit User interface, as shown in Figure 15. 16.
Note: The admin user can also be edited.
Figure 15. 16 Edit User Interface
4. Edit the user information, including user name, password, level and MAC address.
Check the checkbox of Change Password if you want to change the password of the current user.
5. Click the OK button to save the settings and exit the menu.
To Next Page
Loading...
