User Manual of 87XX-P Series NVR
194
15.1 Configuring General Settings
Purpose:
You can configure the output resolution, system time, mouse pointer speed through the Menu > Configuration >
General interface.
Steps:
1. Enter the General Settings interface.
Menu >Configuration> General
2. Select the General tab.
Figure 15. 9 General Settings Interface
3. Configure the following settings:
• Language: The default language used is English.
• Resolution: Select the output resolution, which must be the same with the resolution of the
monitor screen.
• Time Zone: Select the time zone.
• Date Format: Select the date format.
• System Date: Select the system date.
• System Time: Select the system time.
• Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
• Enable Wizard: Enable/disable the Wizard when the device starts up.
• Enable ID Authentication: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.
To Next Page
Loading...
