LTS LTN8708-P4 - Managing Network HDD

User Manual of 87XX-P Series NVR
166
12.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Click the Add button to enter the Add NetHDD interface, as shown in Figure 12. 13.
Figure 12. 13 HDD Information Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Enter the NetHDD Directory in the text field.
3) Click the OK button to add the configured NAS disk.
Note: Up to 8 NAS disks can be added.
Figure 12. 14 Add NAS Disk
• Add IP SAN: