LTS LTN8708-P4 - Page 31

User Manual of 87XX-P Series NVR
31
Figure 2. 19 Manual Adding IP Camera Interface
2) Click the button to add the camera.
Table 2. 1 Explanation of the icons:
Icon
Explanation
Icon
Explanation
Edit basic parameters of the camera
Add the detected IP camera.
Delete the IP camera
The camera is disconnected; you can
click the icon to get the exception
information of camera.
The camera is connected.
Advanced settings of the camera.
2. To add other IP cameras:
1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface.
Figure 2. 20 Custom Adding IP Camera Interface
2) You can edit the IP address, protocol, management port, and other information of the IP camera to
be added.
3) Click Add to add the camera.
Option 2:
Steps:
1. Enter the Camera Management interface.
Menu> Camera> Camera