7
Test
The Test feature allows you to test the lights on your telephone and the
display, if the telephone has one.
To test the light and display on the telephone
1. While on-hook, press and hold down .
The lights go on steadily, and, if your telephone has a display, all the
display segments fill in.
2. To end test, release .
Lights return to normal operation.
Note: If the display or the lights do
not
respond during the test, notify your
system manager.
Transfer
The Transfer feature allows you to transfer a call from your telephone to
another extension or outside number.
To send the present call to another extension or outside number
1. Press .
Present call is put on hold, and the red light next to blinks.
2. Dial the number to which the call is to be transferred.
3. Remain on the line and announce the call; if busy or if no answer,
return to the held call by pressing and then releasing the switchhook.
4. Press again.
Call is sent to the dialed extension or number.
5. Hang up.
Transfer
Transfer
Transfer
Hold
Transfer
To Next Page
Loading...
