6
Speaker (Listen-Only) and Group Listen
Note: The Speaker feature allows you to place calls or access other
features without lifting the handset. However, in order to speak to
the other party, you must use the handset.
With the Group Listen feature, you can turn on the speaker while
active on the handset, and both are active at the same time.
To place a call without lifting the handset or for any listening-only
feature (such as monitoring a call on which you have been put on
hold or for group listening)
1. Press .
Red light next to goes on.
2. Place a call or access the selected feature.
3. Adjust the speaker volume if necessary:
To raise the volume, press the right half of the Volume control button
labeled ; to lower the volume, press the left half of the Volume
control button labeled . If you have a display, it shows the
volume level:
To change from the speaker to the handset
1. Lift the handset and talk.
Speaker goes off when you lift the handset.
Red light next to goes off.
To change from the handset to the speaker
1. While handset is off-hook, press
Red light next to goes on.
You can now hang up handset (within 10 seconds) and the call will
remain active on the speaker. However, in order to talk to the other
party, you must use the handset.
With the Group Listen feature, you can turn on the speaker while the
handset is off-hook, and both the handset and speakerphone are
active at the same time. However, again, you must talk through the
handset for the other person on the call to hear you.
To end a call (while the handset is on-hook and only the speaker is
active)
1. With the handset on-hook, press .
Red light next to goes off.
Speaker
Speaker
->>>>>> +
Speaker
Speaker
Speaker
Speaker
Speaker
To Next Page
Loading...
