17
Whisper Page
The Whisper Page feature allows you, if you have the appropriate
permissions, to make an announcement to a person at another extension
currently on another call. Only the person at the other extension hears the
announcement; the other person on the call cannot hear the message.
Note: The M10L-8400 is the only headset adapter that should be plugged
into the Handset jack on the 6400 Series telephones. If other
headset adapters are used, the Whisper Page announcement may
be overheard by the other person on the call.
To make an important announcement (such as an incoming call) to
someone at another extension busy on another call
1. Press , then the dial pad key on which the Whisper Page
feature is administered
OR, dial the Whisper Page access code __________.
The people on the other call hear a beep.
The person whom you have called may activate the Whisper Page
Answer feature by using either the feature access code or by pressing
and then the dial pad key on which the Whisper Answer
feature is administered. This will form a two-party speaking path
with your telephone. The other call is put on hold.
2. Speak with the person you have called.
3. When you are finished, you can retrieve the first call from hold by
pressing and then releasing the switchhook.
Note: A person can block interruptions from the Whisper Page
feature by deactivating the feature with the Whisper Page Off
feature. (This feature can be accessed by using the feature
access code or by pressing and then the Whisper
Page Off entry number or * or #.)
Feature
Feature
Feature
To Next Page
Loading...
