Lucent Technologies MERLIN LEGEND Release 6.1 Pocket Reference

MERLIN LEGEND Communications System Release 6.1
Pocket Reference
555-661-116
Issue 1
August 1998
Page 151
Technical Addendum
Remote Modem Connection
Follow these steps to access SPM when you connected offsite via
a modem:
1. Type
spm and press ENTER to display the SPM Welcome
screen.
2. Press ENTER to display a blank screen on which you can enter
modem commands. (You may have to press ENTER several
times.)
3. If your system has activated the Remote Access feature, type
the following:
a.
$7'7
b. Remote access telephone number
c. Barrier code (if existing) preceded by a “W.”
d.
:
4. If your system does not have the Remote Access feature
activated, do the following:
a. Place a voice call to the system on the line to which the
modem is connected by using the main telephone number.
b. Have the operator transfer you to the modem (by pressing
Transfer, dialing
 , and hanging up the telephone).
c. To put the modem on line, type
$7+ or $7+2 , depending
on the type of modem. (In ATH1O, the last “digit” is the
alphabet letter “O,” not zero.)
d. Press
(17(5 , and hang up the telephone.
5. Type the SPM password to display the SPM Main Menu.
Technical Addendum

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English