MERLIN LEGEND Communications System Release 6.1
Pocket Reference
555-661-116
Issue 1
August 1998
Page 23
Release 2.0 Enhancements (October, 1992)
■ A new digital Magic on Hold unit is available in three
configurations:
— Basic Prerecorded Package
— Personalized Package
— Custom Production Package
■ The MERLIN
®
Identifier application enables people to receive,
store, and use information provided by the local telephone
company, specifically, the telephone number of a caller in an
area where the service is also supported.
■ An Off-Premises Range Extender (OPRE) supports off-
premises operation with an off-premises extension capability
and extended range operation for tip/ring devices as well as
variable gain to improve voice transmission levels.
■ PagePac
®
Plus Loudspeaker Paging Systems do not require
system adapters. The controller provides 8 built-in zones
(expandable to 56 zones by using up to 3 16-zone expansion
units), group zones, talkback, night bell, operator override,
tones, door supervision, microphone input, and system access
security codes as standard features.
■ PassageWay Solution (Release 1.0) software consisting of four
applications that run with Microsoft
®
Windows
®
3.1 or later and
provide an interface between an IBM
®
-compatible personal
computer and the MERLIN LEGEND system.
■ Four single-line telephones with memory buttons: 710, 715,
725, and 730.
■ Four specialty handsets compatible with all MLX telephones
and the 3101-series, 3178-NHL, 8102, and 8110 single-line
telephones.
Release 2.0 Enhancements (October, 1992)
Refer to
Release 2.0 Notes
for detailed descriptions of Release 2.0
and later enhancements. Release 2.0 includes all Release 1.1
functionality plus the enhancements listed below.
Programming
Programming enhancements include the following:
■ Extension Copy is a feature that reduces programming time by
allowing the use of any extension as a template for
programming another extension or block of extensions through
centralized telephone programming.
■ Integrated Administration provides a single interface through
Integrated Solutions III (IS III) for programming entries common
to the MERLIN LEGEND Communications System and AUDIX
Voice Power
™.
■ Any SPM Version 2.xx (where xx is replaced by numbers)
provides a Convert function for use in upgrading the system
from Release 1.0 or 1.1 system to Release 2.0 and later format,
allowing reuse of existing system programming on the
upgraded system.
To Next Page
Loading...
Need help?
General
