Installation Procedures
19
7 Check the green lights on the fronts of the modules.
a. If a single light is out, power down the carrier, reseat the module, then
power up the carrier.
b. If multiple lights are out, power down the carrier, reseat the leftmost module
that has a light out, then power up the carrier.
c. If the lights are still out, in the continental U.S. call your local Authorized
Dealer or the Lucent Technologies Technical Service Center at
800-628-2888. Outside the continental U.S., contact your Lucent
Technologies Representative or local Authorized Dealer.
8 Continue with “Inserting Batteries in the PARTNER ACS Processor
Module.”
To Next Page
Loading...
