Original Instructions Lumedica OQ LabScope 1.2 | Page 2 of
Introduction
Please read this instruction manual before operating the OCT imaging
system. All statements regarding safety and any technical specifications only
apply when the system is operated correctly.
This system is intended for laboratory use only and is NOT cleared or
certified for medical applications.
This system contains a superluminescent diode (SLD) which is considered a
Class 1 laser device.
There is laser emission from the lens at the end of the scanner.
The Lumedica OQ Labscope OCT Imaging system is an optical coherence tomography system
for general laboratory, research, and industrial use. A 840 nm superluminescent diode (SLD)
provides the light source. When combined with an interferometer and high-resolution
spectrometer, the system generates optical depth images of samples. System is configured
with a scanner that may be used in either a handheld configuration or mounted into a scanner
stand. An embedded Windows PC provides the user interface for controlling the system and
generating the OCT images. The system will image any samples that can be placed about 1 cm
from the end of the scanner
Thank you for purchasing an OQ LabScope system from Lumedica. Our goal at Lumedica is to
build great OCT systems at affordable prices. We believe that OCT imaging should be available
to all who wish to use it in education, research, and industry.
The team at Lumedica is available to support your work. If you have questions or ideas, please
contact us at the email address or phone number below.
Contact: Lumedica, Inc., 701 West Main Street, Suite 200, Durham, NC 27701 USA
Email: support@lumedicasystems.com
Phone: 1-919-590-5693
The version number of this manual is 1.2 and it covers the OQ LabScope hardware version 1.1
with software version 1.2.
LASER RADIATION
To Next Page
Loading...
