Lumel N31U - Page 19

19
N31U User manual
The rst point of the
individual characteristic
- expected value for the
value X1.
Default: 0
-99999...999999
...
Last possible point of the
individual characteristic.
Default: 31
-99999...999999
Last possible point of the
individual characteristic –
expected value for X32.
Default: 31
-99999...999999
Parameter symbol Description Range of changes
Selection of the main
value displayed on the
top line of the display.
Default: VALIND
VALIND – averaged value of the measuring quantity, converted by the
mathematical functions and converted by the individual characteristic.
MIN_MW – minimum value registered during the averaging period of the
moving window method (during the window)
MAX_MW – maximum value registered during the averaging period of
the moving window method (during the window)
Note: The window length can be programed (MAVG parameter).
Display narrowing lower
threshold. If the value to
be displayed is below the
threshold, the lower limit
symbol is displayed
Default: -99999
-99999...999999
Display narrowing upper
threshold. If the value to
be displayed is above the
threshold, the upper limit
symbol is displayed
.
Default: -99999
-99999...999999
Resolution, display
format as the position of
the decimal point.
Default: 0000.00
000000
00000.0
0000.00
000.000
00.0000
0.00000
AUTO – automatic position of the decimal point for maximum possible re-
solution.