Lumel P20 User Manual

14
Fig. 8. View of the “ Output exceedings configuration”
window of the eCon software.
5.1.4. Readout of the measured value
By means of the eCon software you can also read the value currently
measured, check the type of output. These values can be found in the
Measured values window. To display the window, go to the Measured
values tab and use the Show button.
Fig.9. View of the “ Measured values” window of the eCon software

Lumel P20 Specifications

General

Brand	Lumel
Model	P20
Category	Transducer
Language	English