3rd Level
Adjustment Values
Adjustable when the Image
mode is set to Custom
Adjustable when the Image
mode is set to Custom
Adjustable when the Image
mode is set to Custom
Adjustable when the Image
mode is set to Custom
Turn on/off the angle limit
setting
Activate the reverse Pan
direction
Activate the reverse Tilt
direction
1. 5 deg/sec
2. 25 deg/sec
3. 50 deg/sec
4. 80 deg/sec
5. 120 deg/sec
6. 160 deg/sec
7. 200 deg/sec
8. 300 deg/sec
Set the rotation speed of the
cradle head when Preset is
executed
Set the Pan/Tilt moving speed
to vary from the zoom position
Set the D-zoom limit
<Remark>3840 x 2160 59.94/
50 does NOT support this
setting
After turning on, operate
Preset to achieve PTZ Motion
Sync
<Remark> This function will
refer to the default speed
setting, but may automatically
adjust the speed due to the
difference in PTZ movement
range