Lumens VC-TA50

English -14
Chapter 4 Introduction of Remote Control and Setting
Menu
4.1 Remote Control
 The below functions are listed alphabetically
Item
Description
,,,
Move the lens
Auto Tracking
 On/Off: Enable/Disable Auto Tracking
 Full: Full body tracking
 Upper: Half body tracking
 Switch: Switch tracking object
Auto Framing
 On/Off: Enable/Disable Smart viewfinder
 Trigger: Manual framing correction
Back Light
Turn on/off back light compensation
Camera select
Choose camera ID 1 ~ 3
Focus
 Auto: Auto focus
 Manual: Enable Manual Focus
 Far/Near: Adjust the focal length in
Manual
Freeze
Freeze the screen
Home-Enter
Go back to the main page / Execute
Info
Status information
L/R Direction Set
L/R Direction / Normal
Menu
Display OSD menu
Mirror
Rotate the image (OFF / Mirror / Flip /
Rotate)
Pan/Tilt Reset
Clear the Pan/Tilt setting
Picture
Switch image effect (OFF / Neg / B&W)
Power
Power Switch
Preset
Appoint an ID (0 ~ 9) to save the current
position data
Reset
Appoint an ID (0 ~ 9) to delete the current
position data
Zoom-Fast
 Fast: Adjust image size
 Slow: Fine-tune image size