English -26
5.2.3.2 Partition
1. Select [Partition] for Tracking Mode, and click to access the settings
2. Use PTZ function to adjust to the screen to be partitioned, and then click to save. The partition icon
below will be changed to the saved position
3. If you need to set other partitions, please continue using PTZ function to adjust the screen, and then
click to save
<Remark> If a red box is displayed when adjusting the screen, it means that the position overlaps with that of other
partitions. Please adjust the screen again and save it when a green box is displayed
<Remark> Overlapping partition positions may cause abnormal tracking behavior
4. Click to enable the Partition feature
To Next Page
Loading...
Need help?
General
