Lumens VC-TA50

English -30
5.2.7 System Settings - Network
No
Item
Function Descriptions
1
DHCP
Network setting of camera. Change of setting is available when DHCP function is
closed
2
HTTP port
Set HTTP port. The default Port value is 80
3
HTTPS port
Set HTTPS port. The default Port value is 81
4
Tracking Data Output
When enabled, PTZ position information can be reported when the camera
moves
1. Serial Output: Please set the protocol to VISCA and the baud rate to 38400
2. IP output: Set the destination IP address and port
<Remark> When Tracking Data Output is enabled, the camera performance may
be affected.
○
1
○
2
○
3
○
4