What to do if my Lumiax Magicube Controller shows a short circuit?
If your Lumiax Controller indicates a short circuit, switch off all loads and remove the short circuit. The load will automatically reconnect after 1 minute.
What to do if my Lumiax Magicube Controller displays an over current?
If the Lumiax Controller is showing an over current, reduce the load. The controller will resume working after 1 minute, and the load will be reconnected when the battery is recharged.
Why is the battery voltage too high on my Lumiax Magicube?
If the battery voltage is too high on your Lumiax Controller, check if other sources are overcharging the battery or if the battery parameter is set correctly. If neither of these is the cause, the controller might be damaged.
What to do if my Lumiax Magicube Controller is over temperature?
If your Lumiax Controller is experiencing over temperature, it will return to normal operation after the temperature decreases.
What to do if the Lumiax Controller shows abnormal battery voltage at start-up?
If the Lumiax Controller displays an abnormal battery voltage at start-up, charge or discharge the battery so that the battery voltage is within the normal operating range (8.5~15.5V or 20~30V).
Details on safety symbols and important instructions for safe operation.
Manufacturer's disclaimer regarding damages, misuse, and unauthorized repairs.
Explanation of MPPT technology, its advantages, and current boost concept.
Description of the four charging stages: MPPT, Boost, Float, and Equalize.
Visual representation and measurements for the MC2010 model.
Visual representation and measurements for the MC4010 model.
Identification and description of MC2010 components and features.
Identification and description of MC4010 components and features.
Details on temperature sensor connection and RS485 communication port.
Information on Bluetooth and IoT wireless communication options.
Essential safety and procedural notes before and during installation.
Guidelines for selecting an appropriate and safe mounting location.
Step-by-step guide for connecting PV modules, battery, and loads.
Specifications for wire sizing, types, and grounding requirements.
Explanation of the meaning of different LED states and colors.
How to use the MENU and OK buttons for navigation and control.
Understanding the LCD display, status descriptions, and interface cycling.
Common faults (E1-E5) and their troubleshooting steps.
Instructions for setting various operational parameters like voltage and battery type.
Configuration and operation of Street Lamp and User-defined load modes.
Common faults, their reasons, and troubleshooting steps.
Description of the controller's protective features against various faults.
Recommended regular checks and maintenance tasks for the controller.
Detailed technical parameters and specifications for MC2010 and MC4010.
Detailed technical parameters and specifications for BT models.
Graphs illustrating conversion efficiency for MC2010 at different power levels.
Graphs illustrating conversion efficiency for MC4010 at different power levels.
The Lumiax Magicube series MPPT Solar Controller is an advanced solar PV charge controller designed to optimize the charging process in solar systems. It utilizes Maximum Power Point Tracking (MPPT) technology, achieving a conversion efficiency of up to 98%, which ensures that the maximum available power from the solar module is utilized to charge the battery. This controller is suitable for various solar system configurations, offering flexibility and a range of features to enhance system performance and battery life.
The primary function of the Magicube series controller is to manage the charging of batteries from solar panels. It employs a sophisticated 4-stage battery charging algorithm: MPPT, boost, equalization, and float.
MPPT Charge: In this initial stage, the controller actively tracks the maximum power point of the solar module to extract the highest possible power. This is particularly beneficial when the solar module's maximum power voltage (Vmp) is significantly higher than the battery voltage, leading to a "current boost" where the battery current is proportionally greater than the solar input current. This stage continues until the battery reaches the boost voltage setpoint.
Boost Charge: Once the battery voltage reaches the boost setpoint, the controller switches to constant-voltage regulation to prevent overheating and excessive gassing of the battery. This stage typically lasts for 120 minutes. The controller enters the boost charging stage upon power-on if it detects neither an over-discharged nor an over-voltage condition.
Equalize Charge: This stage is designed for certain battery types that benefit from periodic equalizing charges. It helps to stir the electrolyte, balance battery voltages, and complete chemical reactions by increasing the battery voltage above the standard complement voltage, causing the battery electrolyte to gasify. If the controller detects an over-discharged battery, it will automatically initiate a 120-minute equalization charge. This stage is not performed constantly to prevent excessive gassing or overheating.
Float Charge: After the boost voltage stage, the controller reduces the battery voltage to the float voltage setpoint. In this stage, the battery is fully recharged, and the charge current is reduced to a smaller voltage and current to offset self-consumption and small loads, maintaining full battery storage capacity without overcharging. If system loads exceed the solar charge current and the battery voltage drops below the boost reconnect charging voltage, the controller will exit the float stage and return to bulk charging.
The controller also offers multiple load control modes, including "Always on," "Dusk to Dawn," "Evening," and "Manual," providing flexibility in managing connected loads. It features real-time energy statistics, allowing users to monitor operating data and working conditions easily through an LCD display.
The Magicube series controller is designed for ease of use and offers several features that enhance its functionality and user experience:
To ensure optimal system performance and longevity, the Magicube series controller incorporates features that facilitate maintenance and provides recommendations for regular checks:
The Magicube series MPPT Solar Controller is a robust and intelligent solution for managing solar power, offering efficient charging, comprehensive protection, and user-friendly features for various off-grid and hybrid solar applications.
General| Brand | Lumiax |
|---|---|
| Model | Magicube Series |
| Category | Controller |
| Language | English |
To Next Page
