Need help?Do you have a question about the Lumiax MPPT-DC Series and is the answer not in the manual?
General| Brand | Lumiax |
|---|---|
| Model | MPPT-DC Series |
| Category | Controller |
| Language | English |
Safety guidelines for using the solar charge controller in PV systems.
Manufacturer's disclaimer regarding damages from improper use.
Provides physical dimensions for various MPPT-DC controller models.
Details on transport mode for lithium batteries to reduce power consumption.
Controller enters transport mode if only connected to battery for 5 minutes.
How the remote control displays status in transport mode.
Procedure to exit transport mode by connecting solar or pressing test key.
Using the 'Test' key to turn the load on for 10s for verification.
Using the 'Status' key to read the controller's running status.
Controller performs self-test upon battery connection.
Details on controller compatibility with Lithium, AGM, Liquid, and Gel batteries.
How the controller protects lithium batteries from charging below 0°C.
Setting the controller for dusk-to-dawn lighting control.
Configuration for five-stage dimming based on time intervals.
Setting Time of Use (TOT) mode for load control.
Controller disconnects load when battery voltage drops below LVD.
Controller restores load when battery recharges to recovery voltage.
Setting thresholds for day/night detection and load delay.
Automatic dimming based on battery voltage and set percentage.
Details on enabling and configuring automatic dimming.
Energy control mode for lithium batteries based on charge/discharge.
Explanation of LED status indicators for normal and fault conditions.
Recommended connection methods for LED lights with different models.
Information on sensor types and installation for lighting control.
To Next Page
