LUMINELL CP2 - Compatible Products

Doc. No.: CP2 Control Panel_usermanual_D0077_EN_v1.7.docx7
Page 3 of 10
1.1 COMPATIBLE PRODUCTS
Luminaire type
Luminaire modell
Control input signal
Bowlight
BLX C (all models)
Wired 0-10V (1 channel)
Bowlight
BLX D (all models)
Wired 0-10V (2 channel)
Floodlight
RLX B (all models)
NOT compatible!
Floodlight
RLX C AC (with dim option)
Wired 0-10V (1 channel) *
Floodlight
RLX C DC (all models)
Wired 0-10V (1 channel)
Floodlight
RLX Cx (all models)
Wired 0-10V (1 channel) *
Floodlight
RLX D AC 240W (all models)
Wired 0-10V (1 channel)
Floodlight
RLX D DC (all models)
Wired 0-10V (1 channel)
Floodlight Ex
RLX Cx (all models)
Wired 0-10V (1 channel)
Floodlight Ex
RLX Dx (all models)
Wired 0-10V (1 channel)
Searchlight module
SLX B (all models)
NOT compatible!
Searchlight module
SLX C (all models)
Wired 0-10V (1 channel)
Searchlight module
SLX D (all models)
Wired 0-10V (2 channel)
*= Not possible to dim to zero. With 0V control signal, the luminaire will have a minimum of 5% light
output.
NOTE: If not otherwise stated, the list above includes all power and beam options on the specific model.