LUMINELL SL1 - Product Technical Specifications; SL1 Searchlight Technical Data

4 Technical Data
LUMINELL SWEDEN AB 13
4 TECHNICAL DATA
4.1 SL1
Technical Data SL1
Input
Nominal voltage
24VDC (20...28VDC)
Power consumption in operation
Max 500W
Power consumption in standby
mode (light off)
5W
Current at 24V
Max 20,8A
Installation
Mounting position
- Standing (default factory setting)
- Hanging (see manuals “Installation Menu Settings”)
Electrical interface to vessel
- DC power 3 wires (+/-/earth) (see drawing in manual for
details)
- Ethernet to operator control panel or switch (if any)
Mechanical interface to vessel
- 4 x threaded rod M8 in the searchlight base
- Sealing between vessel and searchlight mechanical hub for
galvanic insulation
Light performance
Spot beam
3.5°/ 1 800 kCd / 1340 m
Wide beam
15 °/ 420 kCd / 12 000 lm
Initial luminous flux
20 000 lm
CRI
Min. 70
Color temp
6000 K
Start-up
System boot time
(from power off)
≈30 sec (searchlight homing procedure)
Environmental
Operating ambient temperature
-25ºC to +55ºC (-13°F to 131°F)
Storage temperature
-25°C to +70°C (-13°F to +158°F)
IP class
IP66/67
Vibration
Designed for IEC 60945
Shock
Designed for IEC 60945
Dimensions & weight
Static size
19 x 40 x 42 cm (see drawing in manual for details)
Weight
18 kg
Materials & Colors
Body / casing
Seawater resistant; casted, anodized, and powder coated aluminum
Base, bolts
Stainless steel AISI 316L (1.4404), A4
Glass
Tempered glass
Standard Colors
- White RAL 9016 gloss level 70
- Matt Jet Black RAL 9005 gloss level 20
Pan/ tilt performance
Horizontal (Pan)
- Unlimited movement with slipring technology
- Horizontal movement max speed 33°/second
Vertical (Tilt)
- + 90°/ - 30 movement
- Vertical movement max speed 68°/second
- Wave compensation function (firmware update might be
required, contact Luminell)