5 PREPARATION OF THE PRODUCT FOR USE
LUMINELL SWEDEN AB 15
1. Lift away the accessory box and put
aside.
3. With both hands grab under the LED
housing and lift the complete package
4. The foam around the base protects the
searchlight and the cables from damage
during transport and handling and can
also be used as a temporary stand.
2. Remove the protective foam from the
support arms.
5 PREPARATION OF THE PRODUCT FOR USE
5.1 UNPACKING THE PRODUCT AND CHECKING THE CONTENTS
The system is delivered in a cardboard box containing 1 x SL1 searchlight with 3m
powercable and 0,9m circular LAN cable mounted to the searchlight base.
Make sure the box is placed with the correct side up, see the symbols on the box.
To unpack follow the steps below:
Accessory box contains:
• 1 x SL1 operator panel.
• 1 x Operator powercable 3m.
• 3 x Lan cables 2m circular to RJ45.
• 2 x keystone adapters RJ45 to RJ45.
• 1 x User and installation manual.
• 1 x Quick start guide.
• 1 x Warranty registration card.
To Next Page
Loading...
