7 OPERATION/USE
LUMINELL SWEDEN AB 36
Controlling the light
SL1 LED light is made up of both a wide and narrow beam and latest beam selection + dim
level is saved and activated at the re-ignition.
To turn the light ON and OFF press , the sun indicator is shown in the display status
field upon activated light.
Warning: Optical Radiation.
This fixture generates powerful visible light.
Avoid looking directly at the light source as this may injure the eyes.
Warning: Hot surface, avoid touching.
The LED module becomes hot during prolonged use, do not touch the
surface but allow to cool for at least 15 minutes before handling.
Light dim level
The light dim level is controlled in eight steps by pressing and holding the dim button
and toggling the joystick up / down for the desired level.
To Next Page
Loading...
