Lumiscope 1140 - Applying the Cuff; Preparation for Cuff Application; Cuff Placement on Wrist; Cuff Edge Positioning

14
Applying the Cuff
1. Remove all watches,
jewelry, etc. prior to
attaching the wrist
monitor. Clothing sleeves
should be rolled up and
the cuff should be
wrapped on bare skin for
correct measurements.
2. Apply cuff to left wrist
with palm facing up as
Fig. A.
3. Make sure the edge of the
cuff is about 1 cm from
the palm as Fig. B.
4. In order to insure
accurate measurements,
fasten the velcro strap
securely around your wrist
so there is no extra space
between the cuff and the
wrist as Fig. C.
Fig. A
Fig. B
Fig. C
1 cm