Lumiscope 1140 User Manual

23
Storing Values in and
Recalling Values from Memory
3. To read memory values from
a selected Memory Zone, use
the User-Switching or Time-
Setting Key " " to select a
Memory Zone (1 or 2) from
which you want to recall
values from. Then, press the
RECALL key " " and the
values will be shown on the
LCD display. The last
measurement will be shown
first. Every new press of the
RECALL " " key calls for one
prior value stored.
Note 1: The data in the memory
will not be lost even
when the Blood Pressure
Monitor is switched off.
Note 2: While the device is turned on, the data in memory
can be erased if any of the batteries are moved
away from the socket for one second. If the device
is turned off, the data will be erased when any of
the batteries are removed for at least 10 seconds.

Lumiscope 1140 Specifications

General

Brand	Lumiscope
Model	1140
Category	Blood Pressure Monitor
Language	English